| Wing Rib Drawing | | Wing Trailing Edges |
| Wing Rib Prep | | Wing Hardware |
| Cap Strip Bending Jig | | More Wing Hardware |
| Wing Rib Jig | | Marked and Drilled Spar Holes |
| Wing Rib Gussets | | Cut and Glued Spar Root Doublers |
| First Wing Rib | | Prepared Trailing Edges |
| More Wing Ribs, Second Rib Jig | | Aileron Pocket Details |
| Wing Rib Gusset Problems | | Glued Trailing Edges |
| Wing Ribs 1-10 Completed | | More Trailing Edge Pieces |
| Wing Ribs 11-20 Completed | | Glued Leading Edge |
| Wing Ribs 21-30 Completed | | Glued Ribs to Spars |
| Wing Rib Reinforcement | | Compression Struts |
| Scarfed Wing Spar Cap Strips | | Drag and Anti-Drag System |
| Sanded Wing Ribs | | Spar Packing Strips |
| Front Wing Spar Frames | | Rib "Cheek Blocks", New Jury Strut Brackets, Foam Wing Tips |
| Front Spar Root Blocks | | Bending Wing Skins |
| Left Front Spar Web | | Gluing Wing Skins |
| Right Front Spar Web | | Wing Tip (Part One) |
| Finished Right Front Spar, Added Splice Plates | | Wing Tip (Part Two) |
| Added Spar Blocks | | Aileron Spar |
| Finished Spar Blocks, Sanded Main Spars | | Aileron Control Horn |
| Began Rear Spars | | Aileron Ribs |
| More Rear Spar Work | | Assembled Aileron Ribs |
| Two Steps Forward, One Step Back | | Finished up the Aileron |
| Cut and Scarfed more Spar Pieces | | New Aileron Control Horn |
| Glued the Spar Doublers | | Hang Wing from Ceiling |
| Spar Stiffeners, Root Blocks | | Fit Ribs to Right Wing |
| Planing the Front Spar Frames | | Leading and Trailing Edges |
| Cut and Glue Spar Webbing | | Drag/Anti-Drag, Packing Strips |
| Not so good this time | | Wing Skins |
| Much better! | | Wing Tip |
| Added Splice Plates, Cross Brace Attachment Blocks | | Right Aileron, Hang Wing from Ceiling |
| Glued Plywood Doublers | | Remove Gussets from Left Aileron |
| Sanded Front Spars | | Fiberglass Wing Leading Edges |
| Began Rear Spars (Again) | | Jig Right Wing to Fuselage |
| Glued and Planed Rear Spars | | Attach Rear Spar to Fuselage |
| Glued Plywood Webbing and Support Blocks | | Wing Struts |
| Glued Plywood Rear Spar Doubler | | Wing Struts |
| Filled Some Minor Gaps | | Jury Struts |
| Fit Ribs to Spars | | Jury Struts |
| Wing Leading Edges | | Rear Spar Attachment |